Old Fashioned Blackberry Wine Recipe

Ingredients for a 1 gallon batch: 4lbs blackberries (fresh or frozen) 2.5 lbs white sugar. 1 gallon spring water.

How to make wine from blackberries at home?

Smash blackberries and sugar together in a primary fermentation container. Bring 1 quart of water to a boil and pour over the blackberries and sugar. Stir to dissolve the sugar. Allow the mixture to cool to around 70 degrees and add the remaining ingredients, adding enough water to fill your 1-gallon fermenter.

How many pounds of blackberries do I need for 5 gallons of wine?

The number of blackberries needed depends on how much wine you are making. If you want a small batch of 1-gallon, 4 pounds of berries are enough. This ratio can be your basis for making a larger batch. For example, 5-gallon of blackberry wine will require about 20 pounds of blackberry.

What yeast should I use for blackberry wine?

It is best to use a red wine yeast for blackberry wine. Blackberries are very sweet and low in tannins. Sweet wine yeasts, in particular red wine yeast, will bring out the rich flavors of the wine. Red Star Premier Classique or Montrachet yeasts work well.

How much sugar do you put in a pound of fruit for wine?

But instead of a hydrometer, I use a rule of thumb for how much sugar to add. Three pounds of sugar in 1 gallon of water will produce approximately 14 percent alcohol in a finished wine if the sugar is completely fermented.

What is the cheapest fruit to make wine with?

Known for their distinct sweetness and tropical notes, bananas can be used to make an entire batch of wine or can simply be added to another batch. Costing approximately $1.00 per pound, you'll need 3 lbs of bananas for one batch of wine. Banana wine is one of the cheaper options when it comes to homemade wine.

How many pounds of fruit does it take to make 5 gallons of wine?

To make 5 gallons of wine, the corresponding amount of fruit is typically around 10 to 15 pounds, depending on the strength of the flavor you're looking to distill. 2. The amount of added sugar should be about half.

How much alcohol is in blackberry wine?

Alcohol Percentage: 18.5% abv. Bottle Volume: 500 ml. (16.9 oz.)

What is the easiest fruit to make wine?

In many ways, grapes are the easiest fruit from which to make wine, but we also have a lot of expectations for wine made from grapes, a lot of ideas of how it should taste.

How long do you leave fruit in primary wine?

Let it ferment in the primary fermentor until the must's specific gravity is at 1.040 or lower. Usually this will be within 4 to 7 days. Siphon your must from your primary fermentor into a sanitized and cleaned glass carboy and wine bottle; attach airlocks to both containers. Let sit for about 2 to 3 weeks.

How long does blackberry wine last?

How long do fruit wines last once opened? Similar to regular grape wines, our fruit wines will last about three to four days once opened. Keep them refrigerated to increase that time. Fortified wines, due to their higher alcohol content, will last several weeks after opening if kept in your fridge.

How long do blackberries last in Mason jars?

Answer: Upon returning from the grocery store, remove berries from their plastic basket. Remove all bruised or mouldy berries, and gently pour the remaining unwashed berries into large Mason jars. Store the jars in the coldest part of the fridge; the berries will last approximately one week.

How much yeast do I use for 1 gallon of wine?

Typical usage rate for yeast is 1 gm / gallon of juice, but being a little short or a little long is not a problem, as yeast reproduces to reach a number at which fermentation takes place. Being slightly long on usage amount simply gets the fermentation count up that much faster.

How much yeast do I use for 5 gallons of wine?

So the answer to the question: “how much wine yeast to use?”, is very simple. Always use the whole packet up to 5 or 6 gallons. If you are making more wine than this, add a second packet.

What yeast makes the strongest wine?

Wyeast 4946 Bold Red / High Alcohol Wine Yeast has dominating, strong fermentation characteristics. This direct pitch activator is best used for use in the fermentation of Zinfandel, Pinot Noir, Syrah, or any high sugar must.

How much sugar do I need to make 1 gallon of wine?

So how much sugar should you add when making wine generally one and a half ounces of sugar will make

How much sugar do I need to make 5 gallons of wine?

This is a typical sugar level - our 80lb batch of wine will need (5 gallons x 2.5 oz/gallon) about 12-13 oz of sugar. Mix the sugar in reall good and re-check the gravity. (If you do not have a hydrometer, just add about 1lb of sugar and you will be pretty close.)

How much sugar and yeast should I use for 1 gallon of wine?

1 gallon of crushed, clean fruit (16 cups) 3-4 pounds of white granulated sugar (see note) 1/8 tsp. wine yeast, or 3 tsp.

How many pounds of fruit does it take to make a bottle of wine?

0.13% x 2000 pounds per ton is close to two and half (2.6) pounds of grapes per bottle. A grapevine might have seven pounds of fruit (or more, or less), so with 2.6 pounds of fruit per bottle, one vine can produce between two and three bottles of dry wine.

What sugar is best for wine making?

Fructose or glucose may also be used, preferably some of each, though they can be used singly if desired. Invert sugar is simply a mixture of fructose and glucose which ferments very rapidly. It can be made by boiling a solution of ordinary white granulated sugar with a teaspoonful of citric acid for 20 minutes.